Floor Scrubber Squeegee Assembly for RT15, RT15+ and RT15AC Models

Floor Scrubber Squeegee Assembly for RT15, RT15+ and RT15AC Models. 

Adjusting the squeegee assembly of a floor scrubber machine is essential for ensuring efficient water pickup and achieving streak-free, clean floors. Here’s why this adjustment matters:

1. Optimal Water Recovery

• Purpose: The squeegee collects dirty water and cleaning solution from the floor after scrubbing.
• Why Adjust: If the squeegee isn’t set correctly, it can leave behind water, leading to slippery floors or residue buildup.

2. Prevent Streaks on the Floor

• A poorly adjusted squeegee can leave streaks or uneven drying patterns.
• Proper adjustment ensures the squeegee blade maintains uniform contact with the floor surface.

3. Compensate for Wear and Tear

• Over time, the squeegee blade wears down unevenly.
• Regular adjustment ensures it continues to make proper contact, extending its life and maintaining performance.

4. Adapt to Floor Types

• Different floor surfaces (e.g., smooth tiles vs. textured concrete) require different squeegee pressures or angles.
• Adjusting allows the squeegee to adapt to the specific floor type for maximum efficiency.

5. Prevent Damage

• Excessive pressure can cause premature wear on the squeegee or scratch sensitive floors.
• Too little pressure reduces water recovery and leaves floors wet.

How to Adjust the Squeegee Assembly:

1. Inspect the Squeegee Blades:

   • Ensure the blades are clean, undamaged, and free of debris.
   • Replace if they are cracked, curled, or excessively worn.

2. Set the Correct Angle:

   • Adjust the pitch of the squeegee so that the blade edge makes consistent contact with the floor.

3. Adjust Downward Pressure:

   • Use the adjustment knobs or screws (depending on the model) to increase or decrease pressure as needed.

4. Check Side-to-Side Balance:

   • Make sure the squeegee is level and evenly contacts the floor from end to end.

5. Test and Observe:

   • Run the scrubber on a small area to check for water pickup efficiency and make further adjustments if necessary.

Pro Tip:

For eco-friendly cleaning, make sure your squeegee is adjusted to minimize water waste and prevent detergent runoff into areas where it might harm the environment.